In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and tricks which you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the home, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup which will look a little scary at first, but it is really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape https://dogsrecommend.com/dog-pools/ from the cardboard, so you will have to cut around the edge of the mask so that you get something which looks like a cone. The most important thing here is to be realistic with what kind of paper plate which you’re using.

Then you’ll need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can ensure that nothing will leak once you put the mask on. Be sure that the edges are cut so the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you’re done, so you don’t end up with smudges or smears on your dog.

Then it’s time to paste the mask on your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Be certain it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you have the mask snugged firmly onto the surface of your dog. Don’t make the folds too large or else it might look messy. Once you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Make certain that the ears are level and be sure that it is not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask as your dog protection, you will need to do some sanding to make certain it’s safe on your dog. You can accomplish it by sanding off any excess paper which might have been eliminated from your mask.